Your Quote Request  |  Checkout   

EARTHMOVING EQUPMENT

CRAWLER, 550K JOHN DEERE SLOPE

Where to find CRAWLER, 550K JOHN DEERE SLOPE in Fallbrook

Image for reference only
Actual item may look different
Click on image for larger view

Where to find CRAWLER, 550K JOHN DEERE SLOPE in Fallbrook Where to find CRAWLER, 550K JOHN DEERE SLOPE in Fallbrook

Click on above thumbnails for alternate view

Manufacturer: JOHN DEERE

Model: 550H

Daily: $500.00

Weekly: $2,000.00

Quantity: for a period of  
day(s)   week(s)  


Additional Information

  • John Deere 550 H Series Crawler Dozers
  • Engine 550H LT 550H LGP
  • Type John Deere 4045T with altitude-compensating
  • turbocharger
  • Rated power @ 2,200 rpm 80 SAE net hp (60 kW) 84 SAE net hp (63 kW)
  • Cylinders, wet sleeve 4
  • Displacement 276 cu. in. (4.52 L)
  • Fuel consumption, typical 1.7 to 2.6 gal./hr. (6.4 to 9.8 L/h)
  • Maximum net torque 255 lb.-ft. (344 Nm) @ 1,200 rpm 276 lb.-ft. (372 Nm) @ 1,200 rpm
  • Lubrication Pressure system with full-flow spin-on filter and oil-to-water cooler
  • Air cleaner Dual stage dry type with safety element, precleaner, and dash-mounted restriction indicator
  • Electrical system 12 volt with 65-amp alternator
  • Cooling fan Blower
  • Transmission
  • Dual-path, electronic-controlled, hydrostatic drive; load-sensing feature automatically adjusts speed and power to match changing load conditions; each individual track is powered by a variable-displacement piston pump and two-speed motor combination; decelerator controls speed from holding to 5.0 mph (8.0 km/h)
  • Travel speeds (infinitely variable)
  • Forward and reverse ........................................0 to 5.0 mph (0 to 8.0 km/h)
  • Final Drives
  • Heavy-duty triple-reduction final drives attach directly to the mainframe and are isolated from track frame and dozer frame loads
  • Steering
  • Single-lever steering, direction control, and counterrotation; full power turns and infinitely variable track speeds provide unlimited maneuverability and optimum control; hydrostatic steering eliminates steering clutches and brakes.
  • Brakes
  • Hydrostatic (dynamic) braking stops the machine whenever the direction-control lever is moved to neutral, whenever the decelerator is depressed to the end of travel, or whenever the brake pedal is depressed.
  • Automatic Park Brake
  • Exclusive safety feature engages wet, multiple-disc brakes automatically whenever the engine stops, whenever the operator applies the brake pedal, or whenever the neutral start lever lock is in the stop position; machine cannot be driven with brake applied, reducing wear out or need for adjustment.
  • Hydraulic System
  • System: open center
  • Pressure, main relief: 3,000 psi (20 685 kPa)
  • Pump: gear
  • Flow: 15 gpm (56.8 L/min.) @ 2,200 rpm
  • Filter, return oil: 10 micron
  • Control: T-bar three function
  • Cylinders: heat-treated, chrome-plated, polished cylinder rods, hardened steel (replaceable bushings) pivot pins
  • Capacities (U.S.)
  • Fuel tank with lockable cap: 47 gal. (178 L)
  • Cooling system with coolant recovery tank: 17 qt. (16 L)
  • Engine oil including spin-on filter: 15 qt. (14 L)
  • Transmission reservoir refill with filter change: 11.3 gal. (42.7 L)
  • Final drive (each): 7 qt. (6.6 L)
  • Hydraulic reservoir refill with filter change: 8.5 gal. (32.2 L)
  • All power train and hydraulic systems allow 45-degree maximum operation.
  • John Deere Dura-Trax features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated; fulllength
  • track frame covers reduce material buildup and ease cleaning
  • Undercarriage 550H LT 550H LGP
  • Grouser width (closed center, single bar) 18 in. (457 mm) 24 in. (610 mm)
  • Track shoes, each side 40 40
  • Ground contact area 3,096 sq. in. (19 974 cm2) 4,128 sq. in. (26 632 cm2)
  • Ground pressure 5.4 psi (37.2 kPa) 4.2 psi (29.0 kPa)
  • Ground clearance with single-bar grouser
  • (excluding grouser height) 13.6 in. (345 mm) 13.6 in. (345 mm)
  • Length of track on ground 86 in. (2184 mm) 86 in. (2184 mm)
  • Track gauge, standard 61 in. (1550 mm) 69 in. (1753 mm)
  • Track rollers, each side 6 6
  • Track pitch 6.29 in. (160 mm) 6.29 in. (160 mm)
  • Dimensions 550H LT 550H LGP
  • Overall height with ROPS or cab 108 in. (2743 mm)
  • Overall length 159 in. (4040 mm)
  • Overall length with extended drawbar 161 in. (4090 mm)
  • Ground clearance, minimum
  • Single-bar grouser 13.6 in. (345 mm)
  • Swamp shoes 14.4 in. (366 mm)
  • Blade lift height 31.4 in. (797 mm)
  • Blade digging depth 20.6 in. (523 mm)
  • Blade cutting edge angle, three position
  • adjustable 52, 56, or 60 degrees
  • SAE Operating Weights
  • Base weights were computed for units with standard equipment, rollover protective structures, full fuel tanks, and 175lb. (79 kg) operators.
  • 105-in. (2667 mm) blade and 18-in. (457 mm) track shoes -
  • 550 H LT: 16,800 lb. (7636 kg)
  • 128-in. (3251 mm) blade and 24-in. (610 mm) track shoes -
  • 550 H LGP: 17,500 lb. (7437 kg)

 * Prices are subject to change. Tax and other fees are not shown in this price estimate.

* Please call us with any questions about our crawler 550k john deere slope rentals in Fallbrook CA, Temecula, Camp Pendleton, Bonsall, Escondido, Twentynine Palms and Northern San Diego County.